Hinged door operator DICTAMAT SPR
Small but with high-performance
Characteristics
- Available for 230 VAC as well as for 24 VDC
- Can be easily retrofitted
- Usually, the opening command is given by means of a push-button or by another transmitter (e.g. radar, radio). However, push-and-go is also possible
- Suitable for frequent operation (up to 600 cycles per day, at 2/3 of the max. weight)
- The door can be closed either by push-button or automatically after an adjustable time (0 – 30 seconds)
- Can be upgraded with a set of rechargeable batteries upon request, so that in the event of a power failure, emergency operation is temporarily possible
- Delivered with a stainless steel cover
Product details
Technical data
| Rated input voltage | 24 VDC | 230 VAC / 50/60 Hz |
|---|---|---|
| Consumption | 3 A | 0,5 A |
| Motor rating | 120 W | 120 W |
| Torque | 25 Nm | 25 Nm |
| Power supply for additional components | 24 VDC / max. 0,3 A | 24 VDC / max. 0,3 A |
| Opening time | min. 3 s/90°, max. 6 s/90° (adjustable) | |
| Closing time | min. 3 s/90°, max. 6 s/90° (adjustable) | |
| Hold-open time with closing delay | 0 - 30 s (adjustable) | |
| Hold-open time with closing delay | - with 900 mm door width max. 100 kg - with 1000 mm door width max. 80 kg (see diagram below) |
|
| Opening angle | max. 100° | |
| Duty cycle | 80 % | 80 % |
| IP rating | IP 30 | IP 30 |
| Operating temperature range | -10 °C to max. +50 °C | |
| Position control | encoder, teach-in via automatic teach-in run | |
Diagram
Y: Door weight (kg)
X: door width (m)
Dimensions
All dimensions in mm
Components
Included in the delivery
- Operator for hinged door with pre-assembled mounting plate
- Arm & guide rail
- Mounting tray and stainless steel cover for the operator
- Stainless steel cover for the guide rail
Additional components
- If desired, additional safety and operating equipment can be connected to the operator
Functions
- Open command:
- by push-button (standard)
- push-and-go (when briefly pushing the door by hand, this activates the door operator and it opens the door automatically; adjustable in the standard version)
- optional by radar or radio (requires additional components)
- Close command:
- by push-button (standard)
- automatic closing ((door closes automatically after an adjustable time)
- optional by radar or radio (requires additional components)
- Safety (obstacle detection) during opening: When the door opens and meets an obstacle, the door stops immediately
- Safety (obstacle detection) during closing: When the door closes and meets an obstacle, the door reverses immediately, i.e. it opens again
- Door permanently open: Using the button on the outside of the DICTAMAT SPR housing, the operator can be switched off completely. After switching on, the operator then performs the following two movements (closing and opening) at creep speed (final position check)
- Moving during power failure: The operator runs smoothly without power so that the door can be opened/closed by hand without effort in the event of a power failure
Order information
Order Information
| Description | Part No. |
|---|---|
| DICTAMAT SPR door operator with stainless steel casing sliding arm (pulling), guide rail with stainless steel cover, 24 VDC, incl. control system | 710141 |
| DICTAMAT SPR door operator with stainless steel casing sliding arm (pulling), guide rail with stainless steel cover, 230 VAC, incl. control system | 710140 |
Downloads
| File name | Type |
|---|---|
| Documents | |
| Catalog DICTAMAT SPR | |
| Technical Manual DICTAMAT SPR | |
| Questionnaire Door & Gate Operators | |
| Door operators: Compliance with standards | |
| DWG Drawings | |
| DWG DICTAMAT SPR, 710140, 710141 | dwg |
| DWG DICTAMAT SPR sliding arm SBS | dwg |
| STEP Drawings | |
| STEP DICTAMAT SPR, 710140, 710141 | stp |