Access control system
With pin code or RFID
Characteristics
The access control system is a compact unit in which the input or reading device is also the control device. This is ideal for individual door systems, as there is no need for complex wiring work.
With the separate access control system, proof of authorisation can be provided either by entering a PIN on the keypad or by a transponder chip or card – or, in special security areas, by a combination of PIN and transponder.
The backlighting of the keyboard can be adjusted according to requirements. With the help of different coloured LEDs, operating and programming states are visually signalled.
Two relay outputs allow information to be passed on. In addition, there is an alarm output that can be programmed differently.
It works with both 12 and 24 VDC/AC.
Product details
Technical data
Voltage | 12 VDC ±10 % | 24 VDC ±10 % |
Power consumption (depending on keyboard illumination and quiescent or working current) | 50 - 100 mA | 25 - 50 mA |
IP rating | IP 66 | |
Operating temperature | -30 °C to +50 °C / 98 % RH (relative air humidity) | |
Relay outputs | 2 change-over contacts (change-over contact/make contact/break contact); max. 30 V / 2 A | |
Programmable switching time | 1 - 300 seconds or bistable (ON/OFF) | |
Operation | PIN code and/or transponder Transponder type 125 kHz, 64 Bit, EM 4100/4200 and EM 4102 |
|
Number of users | 999 | |
Status and programming LEDs | green, red, blue, yellow | |
Manipulation protection | after 10 incorrect entries within 10 minutes unit blocked for approx. 1 minute, buzzer and optical signal |
|
Programming level | protected by master code; programming process is indicated by LED/signal tones | |
Keypad | blue backlighting adjustable (always on/always off/automatic switch-off after 60 sec.) | |
Dimensions (H x W x D) | 115 x 76 x 24 mm | |
Connection cable | 2 m | |
Casing, keys | Zamak (zinc die-cast alloy) |
Order information
Order Information
Description | Part No. |
---|---|
Access control system with code keypad and RFID reader, surface type, IP 66 | 710884 |
Accessories
Description | Part No. |
---|---|
Transponder chip BLACK as key fob for RFID terminals of the DICTATOR interlock control system, EM 4102, 125 kHz, 64 Bit | 710850 |
Transponder chip RED as key fob for RFID terminals of the DICTATOR interlock control system, EM 4102, 125 kHz, 64 Bit | 710851 |
Transponder chip YELLOW as key fob for RFID terminals of the DICTATOR interlock control system, EM 4102, 125 kHz, 64 Bit | 710852 |
Transponder chip GREEN as key fob for RFID terminals of the DICTATOR interlock control system, EM 4102, 125 kHz, 64 Bit | 710853 |
Downloads
File Name | Type |
---|---|
Documents | |
Catalog Access Control System | |
Technical Manual Access Control System |