Bar magnet FH300UK
2000 N holding force, flush mounting
Characteristics
The bar magnet FH300UK is generally supplied with an integrated Hall sensor as door locking/interlock control systems require feedback on the locking status of the door.
The FH300UK is not tested according to the German EltVTR for use on doors in escape routes!
It can be connected either to 12 or 24 VDC. The adjustment of the required voltage is done on the connection board by the adequate positioning of jumpers.
Product details
Technical data
| Voltage | 12 VDC ± 10 % | 24 VDC ± 10 % |
| Power consumption | 480 mA | 240 mA |
| Holding force | 2000 N | |
| Duty cycle | 100 % | |
| Operating temperature | -15 °C to +55 °C | |
| Remanence | 0 N (due to release pin) | |
| Material magnet | body: aluminium, magnetic surface: zinc-plated steel | |
| Material counter plate | zinc-plated steel | |
| IP rating | IP 42 | |
| Feedback contact | with Hall sensor (changeover, 24 VDC/2 A) | |
| LED indication light | none | |
| Electrical connection | aprox. 150 mm cable with connection circuit board | |
Dimensions
Dimensions of bar magnet FH300UK
Dimensions of counter plate
11 mm thick
All dimensions in mm
Order information
Order Information
| Description | Part No. |
|---|---|
| FH300UK bar magnet for flush installation, IP 42, with hallsensor, counter plate zinc-plated | 040281SET |
