Bar magnet FH200I
1300 N holding force, IP 67, surface type
Characteristics
The FH200I bar magnet with protection IP 67 is especially designed for outdoor use or in humid surroundings. The casing is made of stainless steel and waterproof. The counter plate is available in either zinc-plated steel or stainless steel.
The FH200I is always furnished with a feedback contact. However, it has not been tested for use on emergency exit doors. The bar magnet can be connected to 12 or 24 VDC. The adjustment of the required voltage is done by simply connecting the 4 leads of the connection cable differently.
It can be installed from both the front and from below the frame. Here you will find information about mounting accessories.
Product details
Technical data
| Voltage | 12 VDC ±10 % | 24 VDC ±10 % |
| Power consumption | 300 mA | 150 mA |
| Holding force | 1300 N | |
| Duty cycle | 100 % | |
| Operating temperature | -25 °C to +65 °C | |
| Remanence | 0 N (due to release pin) | |
| Material magnet | casing: AISI 304; magnetic surface: zinc-plated steel | |
| Material counter plate | zinc-plated steel or AISI 420 (X20Cr13) | |
| IP rating | IP 67 | |
| Feedback contact | Hall sensor (changeover, max. 24 VDC/1 A) | |
| Electrical connection | approx. 6 m connection cable | |
| Cable entry | on top | |
Dimensions
All dimensions in mm
Dimensions of bar magnet FH200I
Dimensions of counter plate
Order information
Order Information
| Description | Part No. |
|---|---|
| FH200I bar magnet for surface installation, IP 67, with hallsensor, counter plate stainless steel, 6 m connection cable | 040664SET |
| FH200I bar magnet for surface installation, IP 67, with hallsensor, counter plate zinc-plated, 6 m connection cable | 040665SET |
