Range W counter plates
Model with angular joint
Characteristics
- DICTATOR counter plates are adapted to DICTATOR electromagnets so the full magnetic force is always ensured
- The counter plate must have at least the same diameter as the magnetic side of the magnet and lie flat against its surface
- Consist of a zinc-plated anchor plate, an angular joint and a black plastic mounting plate
- Due to its angular joint, the counter plate allows for an angle compensation of max. 60° in each direction between door and magnet
- The counter plate must lie flat on the magnetic pole face of the electromagnet
- Tested in combination with DICTATOR electromagnets
Product details
Technical data
| Surface | anchor plate zinc-plated steel |
| Mounting plate and angular joint | black plastic |
| Compensation angle | up to 60° |
Dimensions
All dimensions in mm
| K | L | M | |
|---|---|---|---|
| AP GD 40 W 50 | ø 44 | 50 | 5,5 |
| AP GD 50 W 50 | ø 54 | 51 | 7 |
| AP GD 60 W 50 | ø 64 | 51 | 7 |
| AP GD 70 W 54 | ø 74 | 54 | 10 |
Installation
Installation notes
The base of the counter plate with angular joint is fixed to the door with 4 countersunk head screws.
When untightening the lateral screw on the angular joint, you can change the position of the anchor plate about 60° in both directions.
Make sure that the surface of the plate lies flat against the magnetic surface of the electromagnet face and covers it completely.
The surface of the counter plate should not be damaged/scratched. This would considerably reduce its holding force. Varnishing will void the effect of the counter plate
IMPORTANT
It is imperative to follow the instructions given by the door manufacturer when mounting the counter plate onto fire and smoke doors.
Installation instruction
Order information
Order Information
| Description | Part No. |
|---|---|
| AP GD 70 W 54 counter plate | 040068 |
| AP GD 60 W 50 counter plate | 040070 |
| AP GD 50 W 50 counter plate | 040027 |
| AP GD 40 W 50 counter plate | 040072 |
Downloads
| File Name | Type |
|---|---|
| Documents | |
| Catalog: Counter plates | |
| Datasheet: Counter plates range W | |
| Installation instruction range W counter plates | |
| DWG Drawings | |
| DWG AP GD 50 W 50, 040027 | dwg |
| DWG AP GD 60 W 50, 040070 | dwg |
| DWG AP GD 70 W 54, 040068 | dwg |
| STEP Drawings | |
| STEP Counter plate APGD 50 W50, 040027 | stp |
| STEP Counter plate APGD 60 W50, 040070 | stp |
| STEP Counter plate APGD 70 W54, 040068 | stp |
