Range G counter plates
Flexible counter plate with rubber bearing
Characteristics
- DICTATOR counter plates are adapted to DICTATOR electromagnets in such a way that the full magnetic force is always ensured
- The counter plate must have at least the same diameter as the magnet face of the electromagnet
- Consist of a zinc-plated mounting plate, an elastic joint and a smooth, zinc-plated anchor plate
- The elastic joint between anchor and mounting plate compensates for an angle of up to 10° between door and magnet
- The counter plate must lie flat on the magnetic pole face of the electromagnet
- Tested in combination with DICTATOR electromagnets
Product details
Technical data
| Surface | zinc-plated |
| Compensation angle | up to 10° |
Dimensions
All dimensions in mm
| K | L | M | N | O | P | Q | |
|---|---|---|---|---|---|---|---|
| AP GD 40 G14 | ø 44 | 14 | 5,5 | 3 | 50 | 40 | ø 4,5 |
| AP GD 50 G16 | ø 54 | 16 | 7 | 3 | 55 | 44 | ø 4,5 |
| AP GD 60 G16 | ø 64 | 16 | 7 | 3 | 65 | 55 | ø 4,5 |
| AP GD 60 G30 | ø 64 | 30 | 7 | 3 | 65 | 55 | ø 4,5 |
| AP GD 60 G60 | ø 64 | 60 | 7 | 3 | 65 | 55 | ø 4,5 |
| AP GD 70 G20 | ø 74 | 20 | 10 | 4 | 75 | 60 | ø 5,5 |
Installation
Installation notes
The base of the flexible counter plate is fixed to the door with 4 countersunk head screws. When fixing the counter plate, make sure that the surface of the plate lies flat against the magnet face and covers it completely.
The surface of the counter plate must not be damaged/scratched, as this would considerably reduce its holding force. Varnishing will void the effect of the counter plate.
IMPORTANT
When mounting the counter plate on fire and smoke doors it is imperative to follow the instructions given by the door manufacturer.
Installation instructions
Order information
Order Information
| Description | Part No. |
|---|---|
| AP GD 70 G 20 counter plate | 040026 |
| AP GD 60 G 60 counter plate | 040084 |
| AP GD 60 G 30 counter plate | 040096 |
| AP GD 60 G 16 counter plate | 040039 |
| AP GD 50 G 16 counter plate with flexible joint | 040025 |
| AP GD 40 G 14 counter plate | 040089 |
Downloads
| File Name | Type |
|---|---|
| Documents | |
| Catalog: Counter plates | |
| Datasheet: Counter plates range G | |
| Installation instructions range G counter plates | |
| DWG Drawings | |
| DWG AP GD 50 G 16, 040025 | dwg |
| DWG AP GD 60 G 16, 040039 | dwg |
| DWG AP GD 70 G 20, 040026 | dwg |
| STEP Drawings | |
| STEP Counter plate APGD 50 G16, 040025 | stp |
| STEP Counter plate APGD 60 G16, 040039 | stp |
| STEP Counter plate APGD 80 G20, 040026 | stp |
