Swing door hinges HAWGOOD 41 and 42

For doors up to 60 kg, 40 mm thick and 1000 mm wide

Characteristics

  • Designed for larger swing doors
  • Types 41 and 42 differ only in their spring force (recognizable by the plastic cover of the spring pin: Type 41 black, Type 42 white)
  • When combining types 41 and 42, type 42 must be always placed on top
  • Available either with or without hold-open at approx. 90°
  • Stainless steel shoe, fixing plate either zinc-plated or stainless steel (ideal for use in the food industry)

Product details

Video

YouTube

By loading the video, you accept YouTube's privacy policy.
Learn more

Load video

Technical data

Thickness of the door40 mm
Door weightmax. 60 kg
Door widthmax. 1000 mm
Opening anglemax. 100°
Hold-openwith or without hold-open at about 90°
MaterialStainless steel AISI 304 (shoe), zinc-plated steel (plate);
Stainless steel AISI 304 (shoe & plate)

Models

Pendeltürband 41 mit Feststellung

41 with hold-open

Pendeltürband 41 ohne Feststellung

41 without hold-open

Pendeltürband 42 mit Feststellung

42 with hold-open

Pendeltürband 42 ohne Feststellung

42 without hold-open

Selection criteria

Determining the required swing door hinges depends on the size and weight of the door

Hawgood 40k and 41k Selection

Legend:
K = factor for choosing the type
G = weight of the door in kg
H = height of the door in mm
B = width of the door in mm

Hawgood 40k and 41k Selection

  1. Calculate factor K by using this formula.
  2. Depending on the calculated factor K, look up in the table which type should be installed on top and which on the bottom.
  3. You can use up to 4 swing door hinges per door.
  4. If your doors are heavier and/or wider than the ones shown on the table, please contact our technical customer service.
KIIIIII
< 81 x 411 x 41
8 - 161 x 421 x 41
16 - 201 x 421 x 42
20 - 301 x 42 + 1 x 411 x 42
30 - 502 x 421 x 411 x 42

Dimensions

All dimensions in mm

HAWGOOD 41/42 with hold-open

Hawgood 41 and 42 Dimensions

HAWGOOD 41/42 without hold-open

Swing Door Hinge Type 41 42 w/o hold-open Dimensions

Installation

Installation notes

Hawgood 4000 and 4500 InstallationAt least two hinges are necessary per door. They should be mounted approx. 120 mm below the upper edge or above the lower edge of the door leaf.

First, drill a hole for the spring tube into the frame: diameter 38 mm, depth of hole approx. 90 mm. The hole must centered on the frame and should be drilled accurately at a 90° angle to the edge.

Then, mark the dimensions of the fixing plate on the frame and place the pivot of the swing door hinge into the hole. Ensure that there is clearance all around the plastic tubes, otherwise the spring in the plastic tube cannot work properly. The plate has to be parallel to the edge of the frame, too. Remove the swing door hinge and prepare the sinking of the mounting plate (4 mm thick) into the door frame, so that the mounting plate is flush with the door frame. Now drill the fixing holes, place the pivot of the swing door hinge in the hole and screw the plate to the frame.

IMPORTANT: the hinge shoe must be positioned exactly in a right angle with the frame to ensure the door closes completely.

Hawgood 4000 and 4500 InstallationFix the shoe to the door leaf: Put the door leaf in the desired height against the frame (if necessary place a block of wood underneath to achieve the correct height) and press it against the shoes so you can mark the exact height where the shoes need to sit. Size of the recess: approx. 48 x 29 mm

If the door leaf is thicker than the inner measurement of the shoe, the door leaf must be equally reduced to the necessary thickness on both sides.

Insert the door into the shoes and drill the fixing holes. Make sure the fixing screws are securely screwed in the door.

ATTENTION:

  • If the holes for fixing the shoe to the door do not exactly fit in the center of the holes in the shoe, the shoe may slightly warp when tightened and get jammed against the spring pin.
  • Doors that can be opened more than 100º must be additionally equipped with a mechanical door stopper or similar.

Maintenance

To achieve optimum performance and the longest possible operational life, the DICTATOR HAWGOOD swing door hinges should be regularly cleaned and all moving and rotating parts should be lubricated.

Order information

Order Information

DescriptionPart No.
HAWGOOD swing door hinge type 41, plate zinc-plated, shoe stainless steel, no hold-open300440
HAWGOOD swing door hinge type 41, plate zinc-plated, shoe stainless steel, with hold-open300441
HAWGOOD swing door hinge type 41, completely from stainless steel, no hold-open300442
HAWGOOD swing door hinge type 41, completely from stainless steel, with hold-open300443
HAWGOOD swing door hinge type 42, plate zinc-plated, shoe stainless steel, no hold-open300444
HAWGOOD swing door hinge type 42, plate zinc-plated, shoe stainless steel, with hold-open300445
HAWGOOD swing door hinge type 42, completely from stainless steel, no hold-open300446
HAWGOOD swing door hinge type 42, completely from stainless steel, with hold-open300447

Similar products

Swing door hinge 4000E nickel-plated

HAWGOOD 4000 & 4500

for doors up to 26 kg and 30 mm thick

Swing door hinge 41K grey

HAWGOOD 40K & 41K

For doors up to 50 kg and 35/40 mm thick