Swing door hinges HAWGOOD 40K & 41K

For doors up to 50 kg and 35/40 mm thick

Characteristics

  • Equipped with a hold-open at approx. 90º
  • Models with different spring forces, surfaces, and for different door thicknesses available (see product details > models)
  • The abrasion-resistant special plastic of the swing door hinge ensures a long operational life even under heavy use
  • The plastic shoes are shaped in such a way that their contours can be easily recessed in the door using standard frasers
  • There special bushes (patented bolts) included, which allow a safe and stable fastening, even on doors with hollow profiles

Product details

Technical data

Door thickness35 mm; 40 mm
Door weightmax. 50 kg
Door heightmax. 2000 mm
Door widthmax. 1000 mm
Opening anglemax. 100°
Hold-openat about 90°
MaterialPlastic (shoe), zinc-plated steel (plate);
Plastic (shoe), stainless steel AISI 304 (plate)

Models

  • Door thickness: Available with two different inner dimensions of the shoe, for door thicknesses of 35 mm or 40 mm
  • Spring forces: Types 40K and 41K differ in their spring forces (recognizable by the plastic sleeve of the spring pin: Type 40K grey, Type 41K black).
  • Surfaces: stainless steel model is particularly suitable for use in damp environments or outdoors
Pendeltürband 40K grau

40K – grey

Pendeltürband 40K schwarz

40K – black

Pendeltürband 41K grau

41K – grey

Pendeltürband 41K schwarz

41K – black

Selection criteria

Determining the required swing door hinges depends on the size and weight of the door

Hawgood 40k and 41k SelectionLegend:
K = factor for choosing the type
G = weight of the door in kg
H = height of the door in mm
B = width of the door in mm

Hawgood 40k and 41k Selection

  1. Calculate K factor using the formula.
  2. Depending on the calculated factor K, look up which type should be installed on top and which at the bottom of the door using this table.
  3. In case the calculation of factor K doesn’t result in a suitable combination of swing door hinges, check if you could use another HAWGOOD model or contact our technical customer service.
KIIIIG (kg)
< 41 x 40K1 x 40K< 20
4 - 61 x 41K1 x 40K20 - 30
6 - 101 x 41K1 x 41K30 - 50

Dimensions

All dimensions in mm

Hawgood 40k and 41k Dimensions

(The inner dimension of the shoe in brackets applies to model for 35 mm-thick doors)

Installation

Installation notes

Hawgood 4000 and 4500 InstallationAt least two hinges are necessary per door. They should be mounted at approx. 120 mm below the upper edge or above the lower edge of the door leaf.

First, drill a hole for the spring tube into the frame: diameter 38 mm, depth approx. 90 mm The hole must centered on the frame and should be drilled accurately at a 90° angle to the edge.

Then, mark the dimensions of the fixing plate on the frame and place the pivot of the swing door hinge into the hole. Ensure that there is clearance all around the plastic tubes, otherwise the spring in the plastic tube cannot work properly. The plate has to be parallel to the edge of the frame, too. Remove the swing door hinge and prepare the sinking of the mounting plate (4 mm thick) into the door frame, so that the mounting plate is flush with the door frame. Now drill the fixing holes, place the pivot of the swing door hinge in the hole and screw the plate to the frame.

IMPORTANT: The hinge shoe must be positioned exactly in a right angle with the frame to ensure the door closes completely.

Hawgood 4000 and 4500 InstallationFix the shoe to the door leaf: Put the door leaf in the desired height against the frame (if necessary place a block of wood underneath to achieve the correct height) and press it against the shoes so you can mark the exact height where the shoes need to sit. Size of the recess: ca. 60 x 29 mm.

If the door leaf is thicker than the inner measurement of the shoe, the door leaf must be equally reduced to the necessary thickness on both sides.

Insert the door into the shoes and drill the fixing holes. Make sure the fixing screws are securely screwed in the door.

ATTENTION:

  • If the holes for fixing the shoe to the door do not exactly fit in the center of the holes in the shoe, the shoe may slightly warp when tightened and get jammed against the spring pin.
  • Doors that can be opened more than 100º must be additionally equipped with a mechanical door stopper or similar.

Maintenance

To achieve optimum performance and the longest possible operational life, the DICTATOR HAWGOOD swing door hinges should be regularly cleaned and all moving and rotating parts should be lubricated.

Order information

Order Information

DescriptionPart No.
HAWGOOD swing door hinge 40K, light grey plastics, with hold-open301400
HAWGOOD swing door hinge 40K, black plastics, with hold-open301401
HAWGOOD swing door hinge 40K, light grey plastics, with hold-open, plate stainless steel301400V2A
HAWGOOD swing door hinge 40K, black plastics, with hold-open, plate stainless steel301401V2A
HAWGOOD swing door hinge 40K, plate zinc-plated, shoe light grey plastics, with hold-open, inner dimension of the shoe 35 mmVAR-301400-001
HAWGOOD swing door hinge 40K, plate zinc-plated, shoe black plastics, with hold-open, inner dimension of the shoe 35 mmVAR-301401-001
HAWGOOD swing door hinge 41K, light grey plastics, with hold-open301410
HAWGOOD swing door hinge 41K, black plastics, with hold-open301411
HAWGOOD swing door hinge 41K, light grey plastics, with hold-open, plate stainless steel301410V2A
HAWGOOD swing door hinge 41K, black plastics, with hold-open, plate stainless steel301411V2A
HAWGOOD swing door hinge 41K, plate zinc-plated, shoe light grey plastics, with hold-open, inner dimension of the shoe 35 mmVAR-301410-001
HAWGOOD swing door hinge 41K, plate zinc-plated, shoe black plastics, with hold-open, inner dimension of the shoe 35 mmVAR-301411-001

Similar products

Swing door hinge 4000E nickel-plated

HAWGOOD 4000 & 4500

For doors up to 26 kg and 30 mm thick

Swing door hinge 41 with hold-open

HAWGOOD 41 & 42

For doors up to 60 kg, 40 mm thick and 1000 mm wide